MS4 Selector modification

[nato76]

Hello friends!

Is it possible to create a version selector (buttons & switches tab) that will change position when you hold down the left mouse button and move the mouse left or right (just like real world)?
Now the selector changes position sequentially after each left-click: pos 0 (click) pos 1 (click) pos 2 (click) pos 1 (click) pos 0 etc.
For this reason, a combination without position 0 is not possible, e.g: pos 0 - pos 1 - pos 2 - pos 1 - pos 2 etc.

Thank you

Regards.

[EasyPLC_Master]

Yes, of course, you can create your own push buttons or selectors,
See the UDC -> Buttons -> SelectorSwitch. You can change their behaviour or create your own one.
Using the script code you can actuate over the component when the mouse is over it.

[nato76]

Hi,

Thank you for the information.
I was unable to modify the selector as you wrote. But I made a modification where pressing one button moves the selector up and pressing the other button moves the selector down. For my needs this is sufficient.
Thank you.
Regards