Text only | Text with Images

The EasyPLC Project

General Category => EasyPLC v.5 => Topic started by: danielbrewis on November 29, 2022, 05:39:20 PM

Title: Function Block and Grafcet logic erased after being renamed
Post by: danielbrewis on November 29, 2022, 05:39:20 PM
When I renamed a function block routine, it renamed the routine in the project tree, but it did not rename the opened window of the routine. When I closed the routine window and reopened it, all of my logic was erased. I went through all languages and it seems that Grafcet does the same thing.
Title: Re: Function Block and Grafcet logic erased after being renamed
Post by: EasyPLC_Master on November 30, 2022, 10:49:21 AM
Thank you for the information Daniel.

I will check and correct it for the new software revisión. Please check the thread: https://nirtec.com/forum/index.php?board=6.0 (https://nirtec.com/forum/index.php?board=6.0) to be informed when the new version of EasyPLC will be available.
Title: Re: Function Block and Grafcet logic erased after being renamed
Post by: EasyPLC_Master on December 01, 2022, 06:37:38 PM
Already solved:

https://nirtec.com/forum/index.php?topic=507.0 (https://nirtec.com/forum/index.php?topic=507.0)
Title: Re: Function Block and Grafcet logic erased after being renamed
Post by: danielbrewis on December 21, 2022, 06:19:48 PM
Ok thanks
Text only | Text with Images